SSS Series is a new and innovative type of resistor, especially convenient to replace. This finds application in specific installation requirements like the control panels
Features
• Easy to mount
• Easy to replace
• Several resistors can be connected in series without soldering
Test Specifications
Test
Test Conditions
Limits
Load life
At 700c on-off cycles for 1000 hours
+ (5% + 0.05W)
Rated Load
Rated wattage for 1/2 hours
+ (2% + 0.05W)
Short time overload
10 times the rated wattage for 5 seconds
+ (2% + 0.05W)
Insulation Resistance
500 V d.c
> 100 MΩ
Temperature Coefficient
-55 0c to + 200 0c
+ 150 PPM
Tolerance
+ 10% for 1<W + 1,2,5% for 1>W
Solvent Test
Using TrichloroEthane, IsoPropyl Alcohol
Printing should remain legible
• Non inductive (NI) types are also available (Reduce the maximum resistance to 50% of resistance value shown and working voltage to 70% for non inductive NI types)
• Resistors of any other ohmic value, rating, tolerance or dimension available on request.
